2026/8/27 17:23:13
CNIPA recently issued the Revised Draft Guidelines for the Review and Enforcement of Integrated Circuit Layout Designs (Draft for Public Comment) (the “Guidelines”), which systematically revises the current Guidelines. The revision covers registration examination, revocation, and administrative adjudication. In light of the major changes, practical adjustments, and compliance issues of greatest concern to enterprises, the key contents of the revision are summarized below.
I. Registration Examination
(1) Clarification of the filing date determination
For electronic applications, the filing date is the date on which application documents satisfying the acceptance conditions enter the designated electronic system of CNIPA. In other words, an application is considered filed only when the submitted documents meet all the conditions set out in Article 16 of the Implementing Regulations for the Protection of Integrated Circuit Layout Designs. In addition, if the required integrated circuit sample is received by the CNIPA Receiving Office within 15 days from the date the application documents are received, it is deemed to have been submitted at the same time as the application documents.
For applications filed in person or by mail, the filing date is the date of receipt by the receiving office. Accordingly, if the applicant submits the application documents to the wrong department, or if the receiving office does not receive them in a timely manner because of an incorrect address, the applicant will bear the legal consequences, including a delayed filing date.
(2) Additional examination scope
The previous Guidelines provided only for formal examination of application materials. The revised draft adds examination of obvious substantive defects. Specifically, the following are examined:
whether the name of the layout design clearly indicates that it does not relate to an integrated circuit;
whether the copies or drawings clearly show the characteristics of a circuit board, or whether the catalogue does not include the active component layer;
whether the application materials request protection for ideas, processes, operating methods, or mathematical concepts; and
whether the copies or drawings in the application materials are completely identical to other copies or drawings submitted.
If formalities requirements are not met, the examiner will issue a notice of correction. If they fail the examination for obvious substantive defects, the examiner will issue an office action notice. If the same defect remains unresolved after multiple corrections, the CNIPA may issue a rejection decision. The CNIPA may also directly reject the application if the applicant’s response to the office action does not overcome the defect.
(3) Addition of a Declaration of Originality as a required application document
To align with the revision of the Regulations on the Protection of Integrated Circuit Layout Designs, the revised draft adds a Declaration of Originality as a mandatory application document. It also requires the original parts to be circled in the copies or drawings, with the circled areas numbered sequentially. Original areas that vertically connect multiple layers may be circled separately on the relevant layers and marked with associated numbers. If an entire layer is original, it does not need to be circled.
The revised draft also sets out the following requirements for the Declaration of Originality:
the Declaration must be prepared using the official standard form;
standardized technical language must be used to explain the overall function of the integrated circuit corresponding to the layout design. For each original design area, the applicant must explain key design points, such as structural improvements, the corresponding electronic, photonic, or quantum functions achieved, and other grounds for originality.
(4) Optional submission of a Layout Design Commercial Utilization Information Form
For products that have already been commercially exploited before the filing date, an optional Layout Design Commercial Utilization Information Form may be submitted. The form should truthfully record the name and model of the product incorporating the layout design, as well as the specific manner and scope of its commercial exploitation.
(5) Two new options added to the “Function” field of the application form
To accommodate new types of integrated circuits, “integrated photonic function” and “integrated quantum function” have been added as two new options in the “Function” field of the application form.
(6) Additional requirements for copies or drawings
The requirements for copies or drawings cover both the overall layout design and the individual layer drawings. The submitted copies or drawings must not omit any layer containing substantive design content.
If a copy or drawing has a missing area, and the design content of that missing area cannot be determined from the shapes, connection relationships, or other features of other areas or layers of the layout design, originality may not be claimed based on that missing area. The exception is where the design content of the missing area can be determined from the shapes, connection relationships, or other features of other areas or layers.
(7) New provisions on fee management
The revised draft clarifies payment deadlines for various types of matters, standardizes the time limits for registration fees, examination fees, change fees, and restoration fees, supplements remedial rules for missing remittance information, and clarifies how incomplete remittance information and overdue payments will be handled. These changes make the fee-related processes more standardized for enterprises.
(8) New provisions on document inspection
Currently, integrated circuit layout design applications filed electronically are not open to public inspection. The revised draft opens a new avenue for inspection: for electronically filed applications, the layers shown on the non-confidential information pages of the layout design are to be printed on A4 paper for public inspection.
In addition, the revised draft reiterates that inspection is limited to copies or drawings. Other application documents, as well as integrated circuit samples containing confidential information such as drawing layers and originality statements, are not available for inspection.
(9) Clarification of restrictions on recordal changes
The revised draft specifies that the name or title of the layout design creator, the integrated circuit classification, the date of completion of creation, and the date of first commercial exploitation generally may not be changed. Accordingly, changes to the above particulars will no longer be readily permitted, and applicants must ensure the accuracy of this information when filing.
II. Revocation
(1) Revocation proceedings opened to all parties; anyone may initiate revocation
At present, although anyone may submit an opinion seeking revocation, the CNIPA decides after examination whether to commence proceedings, and the discretion to commence proceedings rests with CNIPA. The revised draft provides that any revocation request submitted by any person is deemed to mandatorily initiate revocation proceedings. Exceptions apply where the requester lacks the capacity to be a party in civil litigation, is not a right holder of a jointly owned layout design exclusive right, or where multiple requesters jointly file a revocation request.
However, all right holders of a jointly owned layout design exclusive right are permitted to request revocation of their jointly owned exclusive right.
(2) Clarified time limits and restrictions for evidence submitted by the revocation requester
If the requester supplements evidence within one month from the date of filing the revocation request, the requester must provide the specific grounds for revocation together with that evidence within that period. If the requester supplements evidence more than one month after the filing date, the panel generally will not consider it, unless the evidence is new evidence submitted with reasons in response to the right holder’s counter-evidence, or consists of notarized documents, originals, or other evidence used to perfect the legal form of the evidence.
(3) Refined method for originality assessment
Currently, originality is assessed by applying, in parallel, the principles of independent creation, distinction from existing designs, and overall judgment. The specific analytical path has been relatively unclear. The revised draft improves the assessment method into a progressive, sequential approach: first, determine whether the creator independently created the design; if so, further determine whether the design is a commonly known conventional design. The new model incorporates the “overall judgment principle” from the original approach and makes it more concrete by examining the position, layout, and connection relationships among the various modules, thereby making the assessment method more specific and the guidance clearer.
III. Administrative Adjudication
(1) Revised determination of the scope of protection of exclusive rights in infringement adjudication
Based on the newly required Declaration of Originality, the basis for protecting exclusive rights in integrated circuit layout designs has been redefined. When filing a request for an administrative ruling, the requester must specify one or more original parts identified in the Declaration of Originality as the basis for claiming protection. The requester may change the original parts claimed before the conclusion of the oral hearing.
(2) Removed the “conventional design defence” as a non-infringement defence
The revised draft removes the “conventional design defence” as a defence to infringement. As a result, if the respondent believes that the accused infringing design constitutes a conventional design, the issue should be raised through the revocation procedure rather than being used directly as a non-infringement defence.
(3) New submission requirements where a Chinese entity licenses a foreign entity
If a Chinese entity permits a foreign entity to use its layout design, the Chinese entity must submit a Technology Export License or a Technology Export Contract Registration Certificate issued by the competent commerce department under the State Council, or a Technology Export Contract Registration Certificate issued by the local competent commerce department.
IV. Enterprise Compliance Recommendations
In light of the revised Guidelines, enterprises should focus on reshaping their internal processes and adjusting their strategies for filing, revocation, and rights enforcement at the compliance level, while also monitoring the final version and implementation requirements.
At the filing stage, enterprises must use the official form to prepare the Declaration of Originality and clearly explain the overall function of the integrated circuit in standardized technical language. In the copies or drawings, the original parts should be numbered and circled in sequence. If the layout design was commercially exploited before the filing date, enterprises may proactively submit the Layout Design Commercial Utilization Information Form.
At the revocation stage, the initiation of revocation proceedings and their opening to the public increase the risk to the stability of enterprises’ intellectual property rights. Enterprises need to closely monitor potential revocation requests filed by competitors or third parties against their layout designs. At the same time, enterprises should promptly familiarize themselves with the new originality assessment standards and organize evidence and arguments accordingly.
At the enforcement stage, enterprises should note that the scope of protection of exclusive rights is determined by the Declaration of Originality.
In addition, when a Chinese entity licenses a layout design to a foreign entity, it must provide an additional Technology Export License or Technology Export Contract Registration Certificate issued by the competent commerce department to ensure procedural compliance.






